Flash File is a website which is created for the purpose of helping those people who is looking Mobile flash Files. In this Website, I am providing many flash files which is 100% working. Because I am also using these all modle files file. If my files not working or you have any issue in downloading you can check my youtube channel.I am uploading videos related crack and tools how you can download and use it... Whatsapp Number +923002947655

Breaking

Tuesday, October 30, 2018

3:46 AM

Oppo 1100 Tested Flash File Free 100% Tested

Oppo 1100 Tested Flash File Free 100% Tested

How to Install OTA Updates Manually using Recovery and ADB sideload

If there’s one thing that Android devices have had right for a very long time, then it’s the system of Over-The-Air a.k.a OTAupdates. This ensures that a user can get updates for his/her device directly on the phone without needing to connect phone to a PC. This feature was adopted by Apple for its iPhone later than Android.
However, the thing with OTA updates is that not everyone gets them right off. To let it go smooth on download servers, manufacturers roll out OTA updates only gradually to select regions and users and complete it over the course of up to one month. But of course, people like us don’t wait that long.
OTA updates can also be installed manually. Although manufacturers won’t give you this as a direct option, but users who receive the OTA updates often publicly share the .zip file of the update. That file is your ticket to install a OTA update manually.
So if you’ve the .zip file of the OTA update you wish to install, follow the instructions below to install it manually.
  1. Download and transfer the OTA update’s .zip file to your Android device’s internal storage (don’t put it inside any folder).
  2. Boot your device into recovery mode.
    └ Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
  3. Select the “Apply update” or “Apply update from phone storage” option.
  4. Select the OTA .zip file you transferred in Step 1 above. and install it.
  5. Once installation is finished, select reboot from recovery main menu.

Download Link :: Link

Sunday, October 28, 2018

10:48 PM

Qmobile i1 PAC Flash File 1000% Tested Free Download

Qmobile i1 PAC Flash File  1000% Tested  Free Download

QMobile i1 Stock Firmware ROM (Flash File) download for your QMobile Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The QMobile i1 running on Android v5.1 Lollipop version which is manufactured by Spreadtrum SC7731 CPU. Use SPD Upgrade Tool for flash Firmware on this device.
Model: QMobile Noir i1.
[*] Chipset: Spreadtrum SC7731.
[*] Driver: SPD SCI Android USB Driver.
[*] Flash Tool: SPD Upgrade Tool.

How To Flash QMobile i1 Firmware

Step 1: Download and extract QMobile i1 flash file on your Computer. After that, you will find SC7731 .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
Download Link :: Link
10:48 PM

QMobile X30 mtk6572 Bin And Secter File Tested Flash File 100% Tested

QMobile X30 mtk6572 Bin And Secter File Tested Flash File 100% Tested

On this page, you will find the official link to download QMobile X30 Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual.

Complete Guide to Install QMobileX30 Flash File

Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
  1. Extract the flash file in any folder on your computer or laptop device.
  2. Need to install SP Flash Tool, Driver and Instruction manual.
  3. Launch the SP Flash Tool and locates Scatter File Tool.
  4. Now, you need to connect your QMobile X30 with the computer and make a connection.
  5. Now click on upgrade and just wait for some time (minutes).
  6. Once the process successfully completed you will get a green signal.
    We hope this article will help you in solving the problems related to QMobile X30 Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
    Download Link :: Link
    10:47 PM

    Qmobile i2 Power 7731 Firmware Flash File 100% Tested Free Download

    Qmobile i2 Power 7731 Firmware Flash File 100% Tested Free Download

    Brand Name: Qmobile
    Brand Prod Model: i2 Power
    Chipset: Spreadtrum 7731
    Operating System: Android
    Android Os Version: 6.0 Marshmallow
    If you are looking for the best 100% working SPD flash tool download links, you are in the right place. In this website, you will get the Spreadtrum flash tools download links. Also, the flash tools are the latest version. In fact, you can use these flash tools on any Spreadtrum based Android phones. And all the download links are checked and verified. Also, these are all direct download links. So, you just have to click on the download link and the Spreadtrum flash tools will start download automatically. In the next section, I will discuss how to use SPD flash tools.
    Things You Need
    Now before using the Spreadtrum flash tools, you need several things. And they are as follows.
    1. You need a desktop computer with Windows operating system. And the preferable OS is Windows 7. Besides you can also use Windows XP, Windows Vista, Windows 8/8.1 or Windows 10.
    2. Then you need PAC files to be flash which is your device firmware.
    3. And you need Spreadtrum driver software.
    4. Then you need Spreadtrum flash tools. So, at first download the flash tool from the download section. Now you are ready to flash SPD Android device. And here I am going to explain the flashing process step by step.
    Download Link :: Link
    10:47 PM

    Qmobile i2 PAC Flash File 1000% Tested Free Download

    Qmobile i2 PAC Flash File 1000% Tested Free Download

    QMobile i2 Stock Firmware ROM (Flash File) download for your QMobile Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The QMobile i2 running on Android v5.1 Lollipop version which is manufactured by Spreadtrum  CPU. Use SPD Upgrade Tool for flash Firmware on this device.
    Model: QMobile Noir i2.
    [*] Chipset: Spreadtru
    [*] Driver: SPD SCI Android USB Driver.
    [*] Flash Tool: SPD Upgrade Tool.

    How To Flash QMobile i1 Firmware

    Step 1: Download and extract QMobile i2 flash file on your Computer. After that, you will find  .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
    Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
    Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
    Download Link :: Link
    10:46 PM

    QMobile X2i 3G Flash File 1000% Tested Free Download

    QMobile X2i 3G Flash File 1000% Tested Free Download
    QMobile X2i 3G  Firmware ROM (Flash File) download for your QMobile Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The QMobile X2i 3G  running on Android  version which is manufactured by Spreadtrum  CPU. Use SPD Upgrade Tool for flash Firmware on this device.
    Model: QMobile X2i 3G.
    [*] Chipset: Spreadtru
    [*] Driver: SPD SCI Android USB Driver.
    [*] Flash Tool: SPD Upgrade Tool.

    How To Flash QMobile X2i 3G Firmware

    Step 1: Download and extract QMobile X2i 3G flash file on your Computer. After that, you will find  .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
    Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
    Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
    Download Link :: Link
    10:46 PM

    QMobile S2 MTK6580 Secter File Tested Flash File 100% Tested

    QMobile S2 MTK6580 Secter File Tested Flash File 100% Tested

    On this page, you will find the official link to download QMobile S2 Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual.

    Complete Guide to Install QMobile S2 Flash File

    Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
    1. Extract the flash file in any folder on your computer or laptop device.
    2. Need to install SP Flash Tool, Driver and Instruction manual.
    3. Launch the SP Flash Tool and locates Scatter File Tool.
    4. Now, you need to connect your QMobile S2 with the computer and make a connection.
    5. Now click on upgrade and just wait for some time (minutes).
    6. Once the process successfully completed you will get a green signal.
      We hope this article will help you in solving the problems related to QMobile S2 Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
      Download Link :: Link
      10:45 PM

      QMobile W50 Flash File 1000% Tested Free Download

      QMobile W50 Flash File 1000% Tested Free Download



      QMobile W50  Firmware ROM (Flash File) download for your QMobile Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The QMobile W50  running on Android  version which is manufactured by Spreadtrum  CPU. Use SPD Upgrade Tool for flash Firmware on this device.
      Model: QMobile W50.
      [*] Chipset: Spreadtru
      [*] Driver: SPD SCI Android USB Driver.
      [*] Flash Tool: SPD Upgrade Tool.

      How To Flash QMobile W50 Firmware

      Step 1: Download and extract QMobile W50 flash file on your Computer. After that, you will find  .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
      Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
      Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
      Download Link :: Link
      10:45 PM

      QMobile W20 MT6580 Scatter Flash File 100% Tested Free Download

      QMobile W20 MT6580 Scatter Flash File 100% Tested Free Download

      Complete Guide to Install QMobile W20 Flash File

      Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
      1. Extract the flash file in any folder on your computer or laptop device.
      2. Need to install SP Flash Tool, Driver and Instruction manual.
      3. Launch the SP Flash Tool and locates Scatter File Tool.
      4. Now, you need to connect your QMobile W20 with the computer and make a connection.
      5. Now click on upgrade and just wait for some time (minutes).
      6. Once the process successfully completed you will get a green signal.
        We hope this article will help you in solving the problems related to QMobile W20 Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
        Download Link :: Link
        10:44 PM

        QMobile T200i Flash File 1000% Tested Free Download

        QMobile T200i Flash File 1000% Tested Free Download

        QMobile T200i  Firmware ROM (Flash File) download for your QMobile Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The QMobile T200i  running on Android  version which is manufactured by Spreadtrum  CPU. Use SPD Upgrade Tool for flash Firmware on this device.
        Model: QMobile T200i
        [*] Chipset: Spreadtru
        [*] Driver: SPD SCI Android USB Driver.
        [*] Flash Tool: SPD Upgrade Tool.

        How To Flash QMobile T200i Firmware

        Step 1: Download and extract QMobile T200i flash file on your Computer. After that, you will find  .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.
        Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
        Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.
        Download Link :: Link
        10:43 PM

        Mobile Z4 Mini MT6589 Scatter Flash File 100% Tested Free Download

        Mobile Z4 Mini MT6589 Scatter Flash File 100% Tested Free Download



        Complete Guide to Install QMobile Z4 Mini  Flash File

        Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
        1. Extract the flash file in any folder on your computer or laptop device.
        2. Need to install SP Flash Tool, Driver and Instruction manual.
        3. Launch the SP Flash Tool and locates Scatter File Tool.
        4. Now, you need to connect your QMobile Z4 Minis  with the computer and make a connection.
        5. Now click on upgrade and just wait for some time (minutes).
        6. Once the process successfully completed you will get a green signal.
          We hope this article will help you in solving the problems related to QMobile Z4 Mini  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
          Download Link :: Link
          10:43 PM

          QMobile i6 Metal One MT6580 Scatter Flash File 100% Tested Free Download

          QMobile i6 Metal One MT6580 Scatter Flash File 100% Tested Free Download

          Complete Guide to Install QMobile i6 Metal One MT6580  Flash File

          Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
          1. Extract the flash file in any folder on your computer or laptop device.
          2. Need to install SP Flash Tool, Driver and Instruction manual.
          3. Launch the SP Flash Tool and locates Scatter File Tool.
          4. Now, you need to connect your QMobile i6 Metal One MT6580s  with the computer and make a connection.
          5. Now click on upgrade and just wait for some time (minutes).
          6. Once the process successfully completed you will get a green signal.
            We hope this article will help you in solving the problems related to QMobile i6 Metal One MT6580  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
            Download Link :: Link
            10:43 PM

            QMobile Z9-Plus MT6753 Scatter Flash File 100% Tested Free Download

            QMobile Z9-Plus MT6753 Scatter Flash File 100% Tested Free Download

            Complete Guide to Install QMobile Z9-Plus  Flash File

            Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
            1. Extract the flash file in any folder on your computer or laptop device.
            2. Need to install SP Flash Tool, Driver and Instruction manual.
            3. Launch the SP Flash Tool and locates Scatter File Tool.
            4. Now, you need to connect your QMobile Z9-Plus  with the computer and make a connection.
            5. Now click on upgrade and just wait for some time (minutes).
            6. Once the process successfully completed you will get a green signal.
              We hope this article will help you in solving the problems related to QMobile Z9-Plus  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
              Download Link :: Link
              10:42 PM

              QMobile Z3 MT6589 Dead Fix Tested Flash File Free 100% Working

              QMobile Z3 MT6589 Dead Fix Tested Flash File Free 100% Working

              How To Flash –QMobile Z3 

              Perfectly Working You Must Need to Follow Below


              1. Download Latest version Flash Tools
              2. Extract On Your Computer( Any Drive)
              3. Download You Mobile Same Version Firmware
              4. Extract On Your Computer
              5. Install Your Phone USB Driver On Your Pc
              6. Now Open SP Flash Tools On Your Pc
              7. Load Scatter File Frome Extract Firmware Location
              8. Click Download And Update Button
              9. Now Connect Your Phone With Your PC USB Cable
              10. Your Phone Star Flashing Wait for 5/7 Minute
              11. When Complete Flashing Process Then You Green Ring Will Paper
              12. Now Complete Your Phone Updated
              13. Remove USB Cable & Enjoy Mobile Phone
              14. Don’t Forget Comment & Share Thank You
              Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

               QMobile Z3   Flash File


              Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
              1. Extract the flash file in any folder on your computer or laptop device.
              2. Need to install SP Flash Tool, Driver and Instruction manual.
              3. Launch the SP Flash Tool and locates Scatter File Tool.
              4. Now, you need to connect your  QMobile Z3   with the computer and make a connection.
              5. Now click on upgrade and just wait for some time (minutes).
              6. Once the process successfully completed you will get a green signal.
                We hope this article will help you in solving the problems related to QMobile Z3   Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

                Download Link :: Link

                10:40 PM

                QMobile X900 MT6592 Dead Fix Tested Flash File Free 100% Working

                QMobile X900 MT6592 Dead Fix Tested Flash File Free 100% Working

                How To Flash –QMobile X900 MT6592

                Perfectly Working You Must Need to Follow Below


                1. Download Latest version Flash Tools
                2. Extract On Your Computer( Any Drive)
                3. Download You Mobile Same Version Firmware
                4. Extract On Your Computer
                5. Install Your Phone USB Driver On Your Pc
                6. Now Open SP Flash Tools On Your Pc
                7. Load Scatter File Frome Extract Firmware Location
                8. Click Download And Update Button
                9. Now Connect Your Phone With Your PC USB Cable
                10. Your Phone Star Flashing Wait for 5/7 Minute
                11. When Complete Flashing Process Then You Green Ring Will Paper
                12. Now Complete Your Phone Updated
                13. Remove USB Cable & Enjoy Mobile Phone
                14. Don’t Forget Comment & Share Thank You
                Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

                QMobile X900 MT6592 Flash File



                Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

                1. Extract the flash file in any folder on your computer or laptop device.
                2. Need to install SP Flash Tool, Driver and Instruction manual.
                3. Launch the SP Flash Tool and locates Scatter File Tool.
                4. Now, you need to connect your  QMobile X900 MT6592   with the computer and make a connection.
                5. Now click on upgrade and just wait for some time (minutes).
                6. Once the process successfully completed you will get a green signal.

                  We hope this article will help you in solving the problems related to QMobile X900 MT6592 Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

                  Download Link :: Link

                  10:40 PM

                  QMobile X95 v5.0 Dead Fix Tested Flash File Free 100% Working

                  QMobile X95 v5.0 Dead Fix Tested Flash File Free 100% Working




                  How To Flash –QMobile X95 v5.0 

                  Perfectly Working You Must Need to Follow Below


                  1. Download Latest version Flash Tools
                  2. Extract On Your Computer( Any Drive)
                  3. Download You Mobile Same Version Firmware
                  4. Extract On Your Computer
                  5. Install Your Phone USB Driver On Your Pc
                  6. Now Open SP Flash Tools On Your Pc
                  7. Load Scatter File Frome Extract Firmware Location
                  8. Click Download And Update Button
                  9. Now Connect Your Phone With Your PC USB Cable
                  10. Your Phone Star Flashing Wait for 5/7 Minute
                  11. When Complete Flashing Process Then You Green Ring Will Paper
                  12. Now Complete Your Phone Updated
                  13. Remove USB Cable & Enjoy Mobile Phone
                  14. Don’t Forget Comment & Share Thank You
                  Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

                   QMobile X95 v5.0 Flash File



                  Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

                  1. Extract the flash file in any folder on your computer or laptop device.
                  2. Need to install SP Flash Tool, Driver and Instruction manual.
                  3. Launch the SP Flash Tool and locates Scatter File Tool.
                  4. Now, you need to connect your  QMobile X95 v5.0   with the computer and make a connection.
                  5. Now click on upgrade and just wait for some time (minutes).
                  6. Once the process successfully completed you will get a green signal.
                    We hope this article will help you in solving the problems related to QMobile X95 v5.0  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
                    Download Link :: Link
                    10:39 PM

                    QMobile X80 MT6572 Dead Fix Tested Flash File Free 100% Working

                    QMobile X80 MT6572 Dead Fix Tested Flash File Free 100% Working

                    How To Flash –QMobile X80 MT6572

                    Perfectly Working You Must Need to Follow Below


                    1. Download Latest version Flash Tools
                    2. Extract On Your Computer( Any Drive)
                    3. Download You Mobile Same Version Firmware
                    4. Extract On Your Computer
                    5. Install Your Phone USB Driver On Your Pc
                    6. Now Open SP Flash Tools On Your Pc
                    7. Load Scatter File Frome Extract Firmware Location
                    8. Click Download And Update Button
                    9. Now Connect Your Phone With Your PC USB Cable
                    10. Your Phone Star Flashing Wait for 5/7 Minute
                    11. When Complete Flashing Process Then You Green Ring Will Paper
                    12. Now Complete Your Phone Updated
                    13. Remove USB Cable & Enjoy Mobile Phone
                    14. Don’t Forget Comment & Share Thank You
                    Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

                    QMobile X80 MT6572 Flash File



                    Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

                    1. Extract the flash file in any folder on your computer or laptop device.
                    2. Need to install SP Flash Tool, Driver and Instruction manual.
                    3. Launch the SP Flash Tool and locates Scatter File Tool.
                    4. Now, you need to connect your  QMobile X80 MT6572   with the computer and make a connection.
                    5. Now click on upgrade and just wait for some time (minutes).
                    6. Once the process successfully completed you will get a green signal.


                      We hope this article will help you in solving the problems related toQMobile X80 MT6572 Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
                      Download Link :: Link

                      Wednesday, October 24, 2018

                      8:10 AM

                      A37f MSM8916 V5.1.1 Dead Fix Tested Flash File Free 100% Working

                      A37f MSM8916 V5.1.1 Dead Fix Tested Flash File Free 100% Working

                      MSM8916__OPPO__OPPO__ANDR_v5.1.1__A37f__A37f__A37f__A37fEX_11.A.17_INT_017_201703020641


                      Flashing By CM2QLM And QPST QFIL Qualcomm Flash Tool
                      No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
                      Password Pattern Pin All Lock Remove Done
                      Created by Infinity-Box (c) Chinese Miracle II (c) 2017
                      Device Brand    : OPPO
                      Device Manufact.: OPPO
                      Device Model    : A37f
                      Device CPU      : MSM8916
                      Device IntName  : A37f
                      Device Version  : 5.1.1
                      SWVersion       : A37fEX_11.A.17_INT_017_201703020641
                      CU_SWVer        : OPPO
                      Device Compile  : 3/2/2017 12:44:55 AM
                      Device ExtInfo  : A37f

                      How To Use QFIL

                      1. Launch QFIL
                      2. Connect the device to the PC while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008 
                      3. Under Select Build Type, tick Flat Build
                      4. Under Select Programmer, click Browse
                      5. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
                      6. Click Load XML
                      7. In the Window that pops up, highlight the rawprogram() file then click Open
                      8. Another Window will automatically pop up, highlight the patch() file then click Open
                      9. Click Download
                      10. QFIL should start flashing the firmware, Do Not interrupt
                      11. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. Disconnect the device and boot up
                      Download Link :: Link

                      Friday, October 19, 2018

                      11:51 AM

                      Alcatel OneTouch Pixi 3 4009X Dead Fix Tested Flash File Free 100% Working

                      Alcatel OneTouch Pixi 3 4009X Dead Fix Tested Flash File Free 100% Working

                      1.    Firstly,  extract the folder to the desktop screen of your computer and launch the flash_tools.exe as administrator.
                      2.       After that, download the file, maybe the custom recovery file or stock ROM file and extract to the desktop screen of your computer.
                      3.       Open the file, you get to see the scattered txt file. Just that you know.
                      4.       Now, if your device is alive, try to enable USB Debugging of the device, simply go to settings >> Developers option and enable USD Debugging. If the developers option isn’t visible on your device, go back to Settings >> about pone >> build number (tap the build number up to7-8 times till it shows “You’re now a developer”) then go to developers option and enable USB debugging. If you got a dead or bricked device, skip this step.
                      5.       On your computer, the Flash_tools.exe that you launched, click on the download tab and click the on “Scatter-loading” button and browse for the scattered txt file, according to step 3.
                      6.       After that, input the file, and click on the “download” button. From the below image, you can see I made use of a MT6580 device to run the test, so any MediaTEK device you make use of, it would automatically display.
                      7.       Now, power off your device (if the battery is removable, then remove it), connect your device to your computer using USB cable and once connected, press the volume down or up key, so that your computer would detect the device.
                      8.       Once your device is detected, flashing process would start (you will notice a progress bar running) and it will take some seconds or few minutes before the process is finished. A green button will appear with a success message which indicates that the file is flashed successfully on your device.
                      9.       After that, disconnect your device; wait for like 10 seconds and boot.
                      10.   That’s it. Your device is back. If it’s custom recovery (TWRP or CWM) file you flashed, then you can boot to recovery mode. Simply press and hold Volume Down button + press Power button till it boots to recovery mode.
                      Download Link :: Link
                      disable copy paste.txt Displaying disable copy paste.txt.