Breaking

Sunday, March 31, 2019

10:42 AM

Huawei Mate 10 Pro MT6580 v6.0 Tested Scatter Flash File 100% Ok

Huawei Mate 10 Pro MT6580 v6.0 Tested Scatter Flash File

Huawei Mate 10 Pro MT6580 v6.0 Tested Scatter Flash File Free Download
Huawei Mate 10 Pro MT6580 v6.0 Tested Scatter Firmware
No Dead Risk Dead Fix Virus Clear Hang On Logo Fix
Flashing By Sp Flash Tool-CM2MTK And Any Other Tool
MT6580__Mate_10_Pro__Mate_10_Pro__Mate_10_Pro__6.0__alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P25
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Mate 10 Pro
Device Model   : Mate_10_Pro
Device CPU     : MT6580
Device IntName : Mate 10 Pro
Device Version : 6.0
Device Compile : 4/13/2018 9:19:55 AM
Device Project : alps-mp-m0.mp1-V2.34_keytak6580.weg.m_P25
Device ExtInfo : Mate 10 Pro

Download Link :: Link

10:15 AM

Samsung J7 J700p Convert to j700f Tested Firmware Flash File

Samsung J7 J700p Convert to J700f Tested Firmware Flash File

Samsung J7 J700p Convert to j700f

Follow these steps to enter Download Mode/Odin Mode

  1. Power off your device
  2. Press and hold Volume Down key, Home Key and Power Key
  3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
  4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
  5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
  6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
  7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
  8. Flash succeeded
  9. A To Z Flash File

Download Link :: Link

Saturday, March 30, 2019

7:13 AM

Samsug Glaxay S8 + (G955N) Binary U2 Tested Fimware Free Download Without Credit

Samsug Glaxay S8 + (G955N) Binary U2 Tested Fimware Free Download Without Credit 100% Working By Raja Mobile

Follow these steps to enter Download Mode/Odin Mode

  1. Power off your device
  2. Press and hold Volume Down key, Home Key and Power Key
  3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
  4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
  5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
  6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
  7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
  8. Flash succeeded
  9. A To Z Flash File

Download Link :: Link
5:38 AM

Samsung J3 EMERGE (J327P) U2 Full Fixed ROM Tested File

Samsung J3 EMERGE (J327P) U2 Full Fixed ROM Tested File


Samsung J3 EMERGE (J327P) U2 Full Fixed ROM


Follow these steps to enter Download Mode/Odin Mode
  1. Power off your device
  2. Press and hold Volume Down key, Home Key and Power Key
  3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
  4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
  5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP". After adding the file, click "Start" to begin the flashing process.
  6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
  7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
  8. Flash succeeded
  9. A To Z Flash File
Download Link :: Link

Friday, March 29, 2019

9:18 AM

Samsung J320P Fix Rom 5.1.1 U2 REV2 Convert To J320F Tested File

Samsung J320P Fix Rom 5.1.1 U2 REV2 Convert To J320F Tested File




J320P Fix Rom 5.1.1 U2 REV2 Convert To J320F

Also Read

  1. SM-G570F CERT & NV Data File 
  2.   ZTE Tempo X N9137 Unbrick Tested File Free Download 
  3.   Nokia 150 RM-1190 Contact Service Fix Tested Flash File 
  4.   Samsung S8 PLUS (G955U) Combination File v7.0 Binary U2 Tested Unlock File 
  5.   Samsung Galaxy J7 Sky Pro SM-S727VL Frp Reset Combination File 
  6.   SM-J400F Combination Rom For Adb Enable File For Reset FRP 
  7. Samsung J2 Pro SM-J250F Frp Reset Combination File 
  8. Samsung A6 PLUS A605f U1 Tested Frp Reset Combination File 
  9. Samsung S6 (G920) 7.0.0 U7 Repair IMEI Tested File Download Without Credit File

How To Flash:

1:Download and install device driver software on your computer.
2:Download and extract the Stock ROM (Official/Original Firmware).
3:Download and extract Odin on you PC.
4:Boot your Samsung device into Download mode.
Power off your device
Press and hold Volume Down key, Home Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5:Connect your device to PC then Device is connected to Odin.
6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

Download Link :: Link
6:24 AM

Samsung Galaxy J2 Pro SM-J250F Camera Failed Fix Firmware

Samsung Galaxy J2 Pro SM-J250F Camera Failed Fix Firmware 100% Tested
Also Read

  1. SM-G570F CERT & NV Data File 
  2.   ZTE Tempo X N9137 Unbrick Tested File Free Download 
  3.   Nokia 150 RM-1190 Contact Service Fix Tested Flash File 
  4.   Samsung S8 PLUS (G955U) Combination File v7.0 Binary U2 Tested Unlock File 
  5.   Samsung Galaxy J7 Sky Pro SM-S727VL Frp Reset Combination File 
  6.   SM-J400F Combination Rom For Adb Enable File For Reset FRP 
  7. Samsung J2 Pro SM-J250F Frp Reset Combination File 
  8. Samsung A6 PLUS A605f U1 Tested Frp Reset Combination File 
  9. Samsung S6 (G920) 7.0.0 U7 Repair IMEI Tested File Download Without Credit File

How To Flash:

1:Download and install device driver software on your computer.
2:Download and extract the Stock ROM (Official/Original Firmware).
3:Download and extract Odin on you PC.
4:Boot your Samsung device into Download mode.
Power off your device
Press and hold Volume Down key, Home Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5:Connect your device to PC then Device is connected to Odin.
6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

Download Link :: Link

Wednesday, March 27, 2019

9:13 AM

Samsung S6 G920T Convert To G920F Tested File Free Download Without Credit 100% Working

Samsung S6 G920T Convert To G920f Tested File Free Download Without Credit 100% Working




Also Read

  1. SM-G570F CERT & NV Data File 
  2.   ZTE Tempo X N9137 Unbrick Tested File Free Download 
  3.   Nokia 150 RM-1190 Contact Service Fix Tested Flash File 
  4.   Samsung S8 PLUS (G955U) Combination File v7.0 Binary U2 Tested Unlock File 
  5.   Samsung Galaxy J7 Sky Pro SM-S727VL Frp Reset Combination File 
  6.   SM-J400F Combination Rom For Adb Enable File For Reset FRP 
  7. Samsung J2 Pro SM-J250F Frp Reset Combination File 
  8. Samsung A6 PLUS A605f U1 Tested Frp Reset Combination File 
  9. Samsung S6 (G920) 7.0.0 U7 Repair IMEI Tested File Download Without Credit File

How To Flash:

1:Download and install device driver software on your computer.
2:Download and extract the Stock ROM (Official/Original Firmware).
3:Download and extract Odin on you PC.
4:Boot your Samsung device into Download mode.
Power off your device
Press and hold Volume Down key, Home Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5:Connect your device to PC then Device is connected to Odin.
6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

Download Link :: Link
8:02 AM

Samsung S6 (G920) 7.0.0 U7 Repair IMEI Tested File Download Without Credit 100% Working

Samsung S6 (G920) 7.0.0 U7 Repair IMEI Tested File Download Without Credit 100% Working 




Also Read


  1. SM-G570F CERT & NV Data File
  2. ZTE Tempo X N9137 Unbrick Tested File Free Download 
  3.   Nokia 150 RM-1190 Contact Service Fix Tested Flash File 
  4.   Samsung S8 PLUS (G955U) Combination File v7.0 Binary U2 Tested Unlock File 
  5.   Samsung Galaxy J7 Sky Pro SM-S727VL Frp Reset Combination File 
  6.   SM-J400F Combination Rom For Adb Enable File For Reset FRP 
  7. Samsung J2 Pro SM-J250F Frp Reset Combination File
  8. Samsung A6 PLUS A605f U1 Tested Frp Reset Combination File

How To Flash:


1:Download and install device driver software on your computer.
2:Download and extract the Stock ROM (Official/Original Firmware).
3:Download and extract Odin on you PC.
4:Boot your Samsung device into Download mode.
Power off your device
Press and hold Volume Down key, Home Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5:Connect your device to PC then Device is connected to Odin.
6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

Download Link :: Link

Sunday, March 24, 2019

9:26 AM

Samsung S6 EDGE Plus G9280Z Binary U2 V7.0 Fixed Playstore Multi Languages Free File

Samsung S6 EDGE Plus G9280Z Binary U2 V7.0 Fixed Playstore Multi Languages Free File




Samsung S6 EDGE Plus G9280Z Binary U2 V7.0 Fixed Playstore

Also Read


  1. SM-G570F CERT & NV Data File
  2. ZTE Tempo X N9137 Unbrick Tested File Free Download 
  3.   Nokia 150 RM-1190 Contact Service Fix Tested Flash File 
  4.   Samsung S8 PLUS (G955U) Combination File v7.0 Binary U2 Tested Unlock File 
  5.   Samsung Galaxy J7 Sky Pro SM-S727VL Frp Reset Combination File 
  6.   SM-J400F Combination Rom For Adb Enable File For Reset FRP 
  7. Samsung J2 Pro SM-J250F Frp Reset Combination File Samsung 
  8. J2 Pro SM-J250F Frp Reset Combination File 
  9. Samsung A6 PLUS A605f U1 Tested Frp Reset Combination File

How To Flash:


1:Download and install device driver software on your computer.
2:Download and extract the Stock ROM (Official/Original Firmware).
3:Download and extract Odin on you PC.
4:Boot your Samsung device into Download mode.
Power off your device
Press and hold Volume Down key, Home Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
5:Connect your device to PC then Device is connected to Odin.
6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".

Download Link :: Link

Saturday, March 23, 2019

9:55 AM

Samsung S8 PLUS (G955U) Combination File v7.0 Binary U2 Tested Unlock File Free Download 1000% Working

Samsung S8 PLUS  (G955U) Combination File  v7.0 Binary U2 Tested Unlock File Free Download 1000% Working

                                             Samsung S8 PLUS (G955U) v7.0 Binary U2

How To Flash:

1:Download and install device driver software on your computer.2:Download and extract the Stock ROM (Official/Original Firmware).3:Download and extract Odin on you PC.4:Boot your Samsung device into Download mode.1-Power off your device2-Press and hold Volume Down key, Home Key and Power Key3-When your device vibrates, release Power key while keep holding the Volume Down key and Home key4-Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)5:Connect your device to PC then Device is connected to Odin.6:Click "PDA" or "AP" to add tar.md5 file that you have extracted and then "Start".
Download Link :: Link
9:39 AM

Alcatel One Touch 4030D Dead Fix Scatter Firmware Flash File

Alcatel One Touch 4030D Dead Fix Scatter Firmware Flash  File
Also Read

  1. Samsung IMEI Restore Network Unlock,Sprint Network Unlock Tool 
  2.   How to Unlock/Hack/Bypass/Remove iCloud Activation Lock iOS 12.1.1/12.1.2/12.2
  3. Iphone & iPad Free IMEI Check Carrier SIM Lock 100% Free Tested

How To Flash –AAlcatel One Touch 4030D



Perfectly Working You Must Need to Follow Below

  1. Download Latest version Flash Tools
  2. Extract On Your Computer( Any Drive)
  3. Download You Mobile Same Version Firmware
  4. Extract On Your Computer
  5. Install Your Phone USB Driver On Your Pc
  6. Now Open SP Flash Tools On Your Pc
  7. Load Scatter File Frome Extract Firmware Location
  8. Click Download And Update Button
  9. Now Connect Your Phone With Your PC USB Cable
  10. Your Phone Star Flashing Wait for 5/7 Minute
  11. When Complete Flashing Process Then You Green Ring Will Paper
  12. Now Complete Your Phone Updated
  13. Remove USB Cable & Enjoy Mobile Phone
  14. Don’t Forget Comment & Share Thank You


Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

Alcatel One Touch 4030D Flash File



The following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so-called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

  1. Extract the flash file in any folder on your computer or laptop device.
  2. Need to install SP Flash Tool, Driver and Instruction manual.
  3. Launch the SP Flash Tool and locates Scatter File Tool.
  4. Now, you need to connect your Alcatel One Touch 4030D with the computer and make a connection.
  5. Now click on upgrade and just wait for some time (minutes).
  6. Once the process successfully completed you will get a green signal.


    We hope this article will help you in solving the problems related to Alcatel One Touch 4030D Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
    Download Link:: Link

    Friday, March 22, 2019

    8:33 PM

    ZTE Tempo X N9137 Unbrick Tested File Free Download Without Credit 100% Working Ok

    ZTE Tempo X N9137 Unbrick Tested File Free Download Without Credit 100% Working Ok


    How To Flash –ZTE Tempo X N9137


    Perfectly Working You Must Need to Follow Below

    ------------------------------------------------------------------------------------------------------------

    Also Read


    ---------------------------------------------------------------------------------


    1. Download Latest version Flash Tools
    2. Extract On Your Computer( Any Drive)
    3. Download You Mobile Same Version Firmware
    4. Extract On Your Computer
    5. Install Your Phone USB Driver On Your Pc
    6. Now Open SP Flash Tools On Your Pc
    7. Load Scatter File Frome Extract Firmware Location
    8. Click Download And Update Button
    9. Now Connect Your Phone With Your PC USB Cable
    10. Your Phone Star Flashing Wait for 5/7 Minute
    11. When Complete Flashing Process Then You Green Ring Will Paper
    12. Now Complete Your Phone Updated
    13. Remove USB Cable & Enjoy Mobile Phone
    14. Don’t Forget Comment & Share Thank You

    Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

    ZTE Tempo X N9137 Flash File



    Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

    1. Extract the flash file in any folder on your computer or laptop device.
    2. Need to install SP Flash Tool, Driver and Instruction manual.
    3. Launch the SP Flash Tool and locates Scatter File Tool.
    4. Now, you need to connect your ZTE Tempo X N9137 with the computer and make a connection.
    5. Now click on upgrade and just wait for some time (minutes).
    6. Once the process successfully completed you will get a green signal.


      We hope this article will help you in solving the problems related to ZTE Tempo X N9137 Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
      Download Link :: Link
      10:39 AM

      Alcatel One Touch 8008D Dead Fix Scatter Firmware Flash File Free 100% Tested Ok

      Alcatel One Touch 8008D Dead Fix Scatter Firmware Flash  File  Free 100% Tested Ok 


      Alcatel_OneTouch_Scribe_HD_8008D_MT6589_2AALEG1

      How To Flash –Alcatel One Touch 8008D



      Perfectly Working You Must Need to Follow Below

      1. Download Latest version Flash Tools
      2. Extract On Your Computer( Any Drive)
      3. Download You Mobile Same Version Firmware
      4. Extract On Your Computer
      5. Install Your Phone USB Driver On Your Pc
      6. Now Open SP Flash Tools On Your Pc
      7. Load Scatter File Frome Extract Firmware Location
      8. Click Download And Update Button
      9. Now Connect Your Phone With Your PC USB Cable
      10. Your Phone Star Flashing Wait for 5/7 Minute
      11. When Complete Flashing Process Then You Green Ring Will Paper
      12. Now Complete Your Phone Updated
      13. Remove USB Cable & Enjoy Mobile Phone
      14. Don’t Forget Comment & Share Thank You


      Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.

      Alcatel One Touch 8008D Flash File



      Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.

      1. Extract the flash file in any folder on your computer or laptop device.
      2. Need to install SP Flash Tool, Driver and Instruction manual.
      3. Launch the SP Flash Tool and locates Scatter File Tool.
      4. Now, you need to connect your Alcatel One Touch 8008D with the computer and make a connection.
      5. Now click on upgrade and just wait for some time (minutes).
      6. Once the process successfully completed you will get a green signal.


        We hope this article will help you in solving the problems related to Alcatel One Touch 7042A Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

        For More


        1. Samsung IMEI Restore Network Unlock,Sprint Network Unlock Tool 
        2.   How to Unlock/Hack/Bypass/Remove iCloud Activation Lock iOS 12.1.1/12.1.2/12.2
        Download Link :: Link

        Thursday, March 21, 2019

        7:38 PM

        Huawei Y9 2018 FLA-L22 Florida-L22 Stock Firmware ROM Tested Flash File Free 100% Tested

        Huawei Y9 2018 FLA-L22 Florida-L22 Stock Firmware ROM Tested Flash File Free 100% Tested

        www.atozflashfile.com
        1 version requirements
        1.1 Historical version information table.
        The following versions can be upgraded to this version
        Huawei_Honor_7X_20180606_7.0_OTA
        1.2 Upgrade Environment Requirements
        Applicable to mobile phone software, need to use MICRO SD card to upgrade
        1.3 List of upgrade files
        File Name
        Big package path dload\UPDATE.APP

        2 Upgrade preparation
        2.1 Checking whether the upgrade environment meets the requirements
        Check if the MICRO SD card can be read or written.
        2.2 Obtaining/Checking Upgrade Packages
        The directory structure is the same as: dload\UPDATE.APP
        www.atozflashfile.com
        3 Upgrade instructions
        There are two upgrade methods: forced upgrade and normal upgrade.
        Forced upgrade is not required to boot, so it is suitable for use when it cannot boot normally (including unable to boot, no
        The method enters the standby interface, etc.). The normal upgrade requires power on and can enter the setup module.
        www.atozflashfile.com
        4 upgrade operation
        4.1 Normal upgrade (preferred upgrade method)
        4.1.1 Upgrading big bags
        Step 1: Prepare an SD card. It is recommended to use Sandisk, Kingstone, or Kingmax. The size is recommended at 2G.
        www.atozflashfile.com
        the above.
        Step 2: Format the SD card (optional).
        Step 3: Copy the UPDATE.APP under the big package path to the SD card dload\UPDATE.APP.
        Step 4: Check if there is dload\UPDATE.APP in the root directory of the SD card.
        Step 5: Insert the SD card into the phone to boot, and go to Settings -> System Update -> Local Upgrade -> SD Card Upgrade on the main screen.
        To back up your data, select Back up your data; then, start the upgrade.
        Step 6: The progress process has a progress bar display. After the progress bar is finished, the mobile phone automatically restarts.
        4.2 Forced upgrade
        4.2.1 Upgrading big bags
        Step 1: Prepare an SD card. It is recommended to use Sandisk, Kingstone, or Kingmax. The size is recommended at 2G.
        www.atozflashfile.com
        the above.
        Step 2: Format the SD card (optional).
        Step 3: Copy the UPDATE.APP under the big package path to the SD card dload\UPDATE.APP.
        Step 4: Check if there is dload\UPDATE.APP in the root directory of the SD card.
        Step 4: When the mobile phone is turned off, insert the SD card, and press the volume up button + volume down button + switch button, hand
        The machine automatically enters the upgrade mode and then starts the upgrade, as shown in the figure:

        Download Link :: Link