Flash File is a website which is created for the purpose of helping those people who is looking Mobile flash Files. In this Website, I am providing many flash files which is 100% working. Because I am also using these all modle files file. If my files not working or you have any issue in downloading you can check my youtube channel.I am uploading videos related crack and tools how you can download and use it... Whatsapp Number +923002947655

Breaking

Wednesday, June 19, 2019

1:06 AM

Intex Turbo Curve Flash File Firmware

Intex Turbo Curve Flash File Firmware

SC6533G_4MiB_sc6533g_hs8292u_qvga_t3_OMK_G04_V1.0
About

Device name:-- Intex 

Mobile Model number:-- Intex Turbo Curve

CPU type:-- SPD6531G

Language:-- Multi

Credit:-- Free

Requirements For Flashing

I:- Download and install SPD USB Mobile driver
II:- Download and install Mobile supported box / Dongle setup like Infinity Cm2
How to Flash

  • Download and install SPD USB Mobile drivers
  • Download Flash File From Link and extract it
  • Open supported box setup / Dongle.
  • Select Correct Mobile CPU type From Setup and Choose flash file.
  • Turn off the Mobile, remove the battery.
  • Connect the Cellphone with USB data cable through Computer and insert Mobile battery again.
  • Press and hold Mobile Boot Key
  • Click on flash & then wait for the complete flash
  • Complete of Flash remove USB data cable and power on the device.
  • Enjoy it has done.
Note: Please make a back up of your device before install or update Flashing File.
Download Link :: Link

Tuesday, June 18, 2019

8:06 PM

Nokia 3 TA-1032 DA File

Nokia 3 TA-1032 DA File

DOWNLOAD DA FILE FOR Nokia 3 TA-1032 DA File TO SUPPORT BOOT PROCESS IN PHONE OPERATIONS


FILE HELPS IN....:
  1. READ INFO
  2. REMOVE FRP
  3. MAKING ROM BACKUP
  4. FULL PHONE FLASHING
  5. READING AND REMOVING PRIVACY 
  6. Nokia 3 TA-1032 DA File

Nokia Da File For Sp Tool


Nokia 3 TA-1032 DA File Da File For Sp Tool


A Download Agent (DA) enables your favorite Mediatek Flash Tool to read and write to the device. In a case where the default DA can't, you'll encounter constant errors or the phone just powering up when you connect. This is where a custom DA file comes in. Depending on the tool you're using, you manually load the custom DA ( MTK_AllInOne_DA_SP.bin or DA_SWSEC.bin ) 
Download Link :: Link
7:39 PM

Nokia TA 1047 Nokia 1 DA FILE

Nokia TA 1047 Nokia 1 DA FILE

DOWNLOAD DA FILE FOR NOKIA 1 TO SUPPORT BOOT PROCESS IN PHONE OPERATIONS

FILE HELPS IN....:
  1. READ INFO
  2. REMOVE FRP
  3. MAKING ROM BACKUP
  4. FULL PHONE FLASHING
  5. READING AND REMOVING PRIVACY 

Nokia Da File For Sp Tool

Nokia 1 TA-1047 Da File For Sp Tool


A Download Agent (DA) enables your favorite Mediatek Flash Tool to read and write to the device. In a case where the default DA can't, you'll encounter constant errors or the phone just powering up when you connect. This is where a custom DA file comes in. Depending on the tool you're using, you manually load the custom DA ( MTK_AllInOne_DA_SP.bin or DA_SWSEC.bin ) 
Download Link :: Link
10:28 AM

Wiko Jerry Flash File Stock Firmware ROM

Wiko Jerry Flash File Stock Firmware ROM
 

How To Flash –Wiko Jerry

Perfectly Working You Must Need to Follow Below


  1. Download Latest version Flash Tools
  2. Extract On Your Computer( Any Drive)
  3. Download You Mobile Same Version Firmware
  4. Extract On Your Computer
  5. Install Your Phone USB Driver On Your Pc
  6. Now Open SP Flash Tools On Your Pc
  7. Load Scatter File Frome Extract Firmware Location
  8. Click Download And Update Button
  9. Now Connect Your Phone With Your PC USB Cable
  10. Your Phone Star Flashing Wait for 5/7 Minute
  11. When Complete Flashing Process Then You Green Ring Will Paper
  12. Now Complete Your Phone Updated
  13. Remove USB Cable & Enjoy Mobile Phone
  14. Don’t Forget Comment & Share Thank You
  15. [Atozflashfile.com]NewJerry_spd_V17

Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.


Wiko Jerry Flash File


Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
[Atozflashfile.com]NewJerry_spd_V17
  1. Extract the flash file in any folder on your computer or laptop device.
  2. Need to install SP Flash Tool, Driver and Instruction manual.
  3. Launch the SP Flash Tool and locates Scatter File Tool.
  4. Now, you need to connect your Wiko Jerry Star with the computer and make a connection.
  5. Now click on upgrade and just wait for some time (minutes).
  6. Once the process successfully completed you will get a green signal.

    [Atozflashfile.com]NewJerry_spd_V17
    We hope this article will help you in solving the problems related to Wiko Jerry Star Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

    Complete Guide to Install Wiko Jerry Star Flash File

    Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
    1. Extract the flash file in any folder on your computer or laptop device.
    2. Need to install SP Flash Tool, Driver and Instruction manual.
    3. Launch the SP Flash Tool and locates Scatter File Tool.
    4. Now, you need to connect your Wiko Jerry with the computer and make a connection.
    5. Now click on upgrade and just wait for some time (minutes).
    6. Once the process successfully completed you will get a green signal.

      We hope this article will help you in solving the problems related to Wiko Jerry Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
      Download Link :: Link 
      9:59 AM

      Wiko Iggy Flash File Stock Firmware ROM

      Wiko Iggy Flash File Stock Firmware ROM 
       

      How To Flash –Wiko Iggy

      Perfectly Working You Must Need to Follow Below


      1. Download Latest version Flash Tools
      2. Extract On Your Computer( Any Drive)
      3. Download You Mobile Same Version Firmware
      4. Extract On Your Computer
      5. Install Your Phone USB Driver On Your Pc
      6. Now Open SP Flash Tools On Your Pc
      7. Load Scatter File Frome Extract Firmware Location
      8. Click Download And Update Button
      9. Now Connect Your Phone With Your PC USB Cable
      10. Your Phone Star Flashing Wait for 5/7 Minute
      11. When Complete Flashing Process Then You Green Ring Will Paper
      12. Now Complete Your Phone Updated
      13. Remove USB Cable & Enjoy Mobile Phone
      14. Don’t Forget Comment & Share Thank You
      15. [Atozflashfile.com]IGGY_V2413654

      Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.


      Wiko Iggy Flash File


      Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
      [Atozflashfile.com]IGGY_V2413654
      1. Extract the flash file in any folder on your computer or laptop device.
      2. Need to install SP Flash Tool, Driver and Instruction manual.
      3. Launch the SP Flash Tool and locates Scatter File Tool.
      4. Now, you need to connect your Wiko Iggy with the computer and make a connection.
      5. Now click on upgrade and just wait for some time (minutes).
      6. Once the process successfully completed you will get a green signal.

        [Atozflashfile.com]IGGY_V2413654
        We hope this article will help you in solving the problems related to Wiko Iggy Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

        Complete Guide to Install Wiko Iggy Flash File

        Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
        1. Extract the flash file in any folder on your computer or laptop device.
        2. Need to install SP Flash Tool, Driver and Instruction manual.
        3. Launch the SP Flash Tool and locates Scatter File Tool.
        4. Now, you need to connect your Wiko Iggy with the computer and make a connection.
        5. Now click on upgrade and just wait for some time (minutes).
        6. Once the process successfully completed you will get a green signal.

          We hope this article will help you in solving the problems related to Wiko Iggy Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
          Download Link :: Link
          2:20 AM

          Wiko Highway Star Flash File Stock Firmware ROM

          Wiko Highway Star Flash File Stock Firmware ROM 
                

          How To Flash –Wiko Highway Star

          Perfectly Working You Must Need to Follow Below


          1. Download Latest version Flash Tools
          2. Extract On Your Computer( Any Drive)
          3. Download You Mobile Same Version Firmware
          4. Extract On Your Computer
          5. Install Your Phone USB Driver On Your Pc
          6. Now Open SP Flash Tools On Your Pc
          7. Load Scatter File Frome Extract Firmware Location
          8. Click Download And Update Button
          9. Now Connect Your Phone With Your PC USB Cable
          10. Your Phone Star Flashing Wait for 5/7 Minute
          11. When Complete Flashing Process Then You Green Ring Will Paper
          12. Now Complete Your Phone Updated
          13. Remove USB Cable & Enjoy Mobile Phone
          14. Don’t Forget Comment & Share Thank You
          15. [Atozflashfile.com]Wiko_Highway_Star_Lollipop_V15

          Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.


          Wiko Highway Star Flash File


          Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
          [Atozflashfile.com]Wiko_Highway_Star_Lollipop_V15
          1. Extract the flash file in any folder on your computer or laptop device.
          2. Need to install SP Flash Tool, Driver and Instruction manual.
          3. Launch the SP Flash Tool and locates Scatter File Tool.
          4. Now, you need to connect your Wiko Highway Star with the computer and make a connection.
          5. Now click on upgrade and just wait for some time (minutes).
          6. Once the process successfully completed you will get a green signal.

            [Atozflashfile.com]Wiko_Highway_Star_Lollipop_V15
            We hope this article will help you in solving the problems related to Wiko Highway Star Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

            Complete Guide to Install Wiko Highway Star Flash File

            Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
            1. Extract the flash file in any folder on your computer or laptop device.
            2. Need to install SP Flash Tool, Driver and Instruction manual.
            3. Launch the SP Flash Tool and locates Scatter File Tool.
            4. Now, you need to connect your Wiko Highway Star with the computer and make a connection.
            5. Now click on upgrade and just wait for some time (minutes).
            6. Once the process successfully completed you will get a green signal.

              We hope this article will help you in solving the problems related to Wiko Highway Star Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
              Download Link :: Link
              1:07 AM

              Wiko Highway Signs Flash File Stock Firmware ROM

              Wiko Highway Signs Flash File Stock Firmware ROM 
                    

              How To Flash –Wiko Highway Signs

              Perfectly Working You Must Need to Follow Below


              1. Download Latest version Flash Tools
              2. Extract On Your Computer( Any Drive)
              3. Download You Mobile Same Version Firmware
              4. Extract On Your Computer
              5. Install Your Phone USB Driver On Your Pc
              6. Now Open SP Flash Tools On Your Pc
              7. Load Scatter File Frome Extract Firmware Location
              8. Click Download And Update Button
              9. Now Connect Your Phone With Your PC USB Cable
              10. Your Phone Star Flashing Wait for 5/7 Minute
              11. When Complete Flashing Process Then You Green Ring Will Paper
              12. Now Complete Your Phone Updated
              13. Remove USB Cable & Enjoy Mobile Phone
              14. Don’t Forget Comment & Share Thank You
              15. [[Atozflashfile.com]Wiko_Highway_Signs_V12_4.4.2

              Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.


              Wiko Highway Signs Flash File


              Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
              [Atozflashfile.com]Wiko_Highway_Signs_V12_4.4.2
              1. Extract the flash file in any folder on your computer or laptop device.
              2. Need to install SP Flash Tool, Driver and Instruction manual.
              3. Launch the SP Flash Tool and locates Scatter File Tool.
              4. Now, you need to connect your Wiko Highway Signs with the computer and make a connection.
              5. Now click on upgrade and just wait for some time (minutes).
              6. Once the process successfully completed you will get a green signal.

                [Atozflashfile.com]Wiko_Highway_Signs_V12_4.4.2
                We hope this article will help you in solving the problems related to Wiko Highway Signs Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

                Complete Guide to Install Wiko Highway Signs Flash File

                Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
                1. Extract the flash file in any folder on your computer or laptop device.
                2. Need to install SP Flash Tool, Driver and Instruction manual.
                3. Launch the SP Flash Tool and locates Scatter File Tool.
                4. Now, you need to connect your Wiko Highway Signs  with the computer and make a connection.
                5. Now click on upgrade and just wait for some time (minutes).
                6. Once the process successfully completed you will get a green signal.

                  We hope this article will help you in solving the problems related to Wiko Highway Signs Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
                  Download Link :: Link

                  Monday, June 17, 2019

                  8:55 PM

                  Samsung G570F Galaxy J5 Prime Remove Screen Lock FRP ON

                  Samsung G570F Galaxy J5 Prime Remove Screen Lock FRP ON
                  G570FXXU1AQH6_6.0.1_REMOVE SCREEN LOCK_FRP ON
                  Follow these steps to enter Download Mode/Odin Mode
                  1. Power off your device
                  2. Press and hold Volume Down key, Home Key and Power Key
                  3. When your device vibrates, release Power key while keep holding the Volume Down key and Homekey
                  4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
                  5. You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant). Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "Boot.img". After adding the file, click "Start" to begin the flashing process.
                  6. WARNING DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
                  7. When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
                  8. Flash succeeded
                  9. G570FXXU1AQH6_6.0.1_REMOVE SCREEN LOCK_FRP ON
                  G570F U1 7.0 REMOVE SCREEN LOCK
                  Downlaoad Link :: Link 1 :: Link 2

                  G570F U1 6.0.1 PATTERN REMOVE

                  Download Link :: Link 1 :: Link 2

                  G570FXXU1AQH6_6.0.1_REMOVE SCREEN LOCK_FRP ON
                  Download Link :: Link
                  2:12 AM

                  Wiko Highway Flash File Stock Firmware ROM

                  WIKO HIGHWAY Flash File Stock Firmware ROM
                                                    

                  How To Flash –WIKO Wiko Highway

                  Perfectly Working You Must Need to Follow Below


                  1. Download Latest version Flash Tools
                  2. Extract On Your Computer( Any Drive)
                  3. Download You Mobile Same Version Firmware
                  4. Extract On Your Computer
                  5. Install Your Phone USB Driver On Your Pc
                  6. Now Open SP Flash Tools On Your Pc
                  7. Load Scatter File Frome Extract Firmware Location
                  8. Click Download And Update Button
                  9. Now Connect Your Phone With Your PC USB Cable
                  10. Your Phone Star Flashing Wait for 5/7 Minute
                  11. When Complete Flashing Process Then You Green Ring Will Paper
                  12. Now Complete Your Phone Updated
                  13. Remove USB Cable & Enjoy Mobile Phone
                  14. Don’t Forget Comment & Share Thank You
                  15. [Atozflashfile.com]WIKO_HIGHWAY_KITKAT_V19_5.1.1 Lollipop

                  Warning Note: Fast Backup Your Phone Important Personal Data When Flash Your Phone Erase All Data File. So Please Fast Backup Data And Flashing Your Phone Own Risk.


                  WIKO Wiko Highway  Flash File


                  Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
                  [Atozflashfile.com]WIKO_HIGHWAY_KITKAT_V19_5.1.1 Lollipop
                  1. Extract the flash file in any folder on your computer or laptop device.
                  2. Need to install SP Flash Tool, Driver and Instruction manual.
                  3. Launch the SP Flash Tool and locates Scatter File Tool.
                  4. Now, you need to connect your WWiko Highway  with the computer and make a connection.
                  5. Now click on upgrade and just wait for some time (minutes).
                  6. Once the process successfully completed you will get a green signal.

                    [A[Atozflashfile.com]WIKO_HIGHWAY_KITKAT_V19_5.1.1 Lollipop
                    We hope this article will help you in solving the problems related to WIKO HIGHTWAY PURE  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.

                    Complete Guide to Install WIKO Wiko Highway  Flash File

                    Following are the steps to perform in order to Flash Stock Rom or any other custom ROM using so called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
                    1. Extract the flash file in any folder on your computer or laptop device.
                    2. Need to install SP Flash Tool, Driver and Instruction manual.
                    3. Launch the SP Flash Tool and locates Scatter File Tool.
                    4. Now, you need to connect your Wiko Highway   with the computer and make a connection.
                    5. Now click on upgrade and just wait for some time (minutes).
                    6. Once the process successfully completed you will get a green signal.

                      We hope this article will help you in solving the problems related to Wiko Highway  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
                      Download Link :: Link

                      Sunday, June 16, 2019

                      4:28 AM

                      VGO TEL V2+ SC6531E Infinity CM2SCR Flash File Firmware With Boot Key VGOTEL V2+ Flash File Firmware

                      VGO TEL V2+ SC6531E Infinity CM2SCR Flash File Firmware With Boot Key
                      VGOTEL V2+ Flash File Firmware

                      About

                      Device name:-- GFive

                      Mobile Model number:-- V2+

                      CPU type:-- SPD6531E

                      Language:-- Multi

                      Credit:-- Free

                      Requirements For Flashing

                      I:- Download and install SPD USB Mobile driver
                      II:- Download and install Mobile supported box / Dongle setup like Infinity Cm2
                      How to Flash

                      • Download and install SPD USB Mobile drivers
                      • Download Flash File From Link and extract it
                      • Open supported box setup / Dongle.
                      • Select Correct Mobile CPU type From Setup and Choose flash file.
                      • Turn off the Mobile, remove the battery.
                      • Connect the Cellphone with USB data cable through Computer and insert Mobile battery again.
                      • Press and hold Mobile Boot Key
                      • Click on flash & then wait for the complete flash
                      • Complete of Flash remove USB data cable and power on the device.
                      • Enjoy it has done.
                      Note: Please make a back up of your device before install or update Flashing File.

                      Boot Key:- VGO TEL V2+ SC6531E boot key is HOME + 0+ #9

                      Download Link :: Link 1 : Link 2 :: Link 3
                      disable copy paste.txt Displaying disable copy paste.txt.