Breaking

Friday, July 26, 2019

HOTWAV COSMOS V4 Flash File Firmware

HOTWAV COSMOS V4 Flash File Firmware
Hotwav_V4_2SIM_64_8_1_5_A5_QHD_20160405
HOTWAV COSMOS V4 Flash File Firmware

How To Flash HOTWAV COSMOS V4

Step 1: Download and extract HOTWAV COSMOS V4 flash file on your computer. After that, you will find.PAC Firmware inside the folder. Now open SPD Flash Tool and click on the Load Packet button in Flash Tool then select the .pac Firmware file.
Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on the Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.
Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.


HOTWAV COSMOS S8 Flash File Firmware
HOTWAV COSMOS C5 Flash File Firmware
HOTWAV COSMOS V2 Flash File Firmware
Link
HOTWAV COSMOS V4 Flash File Firmware
Download Link:: Link

No comments:

Post a Comment