Breaking

Saturday, November 30, 2019

10:27 PM

MTS 982 Flash File Stock Firmware ROM

MTS 982 OT-4030D Flash File Stock Firmware ROM 
No Dead Risk Virus Clear Hang On Logo Fix

Complete Guide to Install Alcatel MTS 982  Flash File Stock Firmware ROM  Flash File


The following are the steps to perform in order to Flash Stock Rom or any other custom ROM using the so-called flash tool SP(Smart Phone) Flash Device on a windows computer. Before starting the process of flashing make sure that your smartphone device has at least 50 percent of battery.
  1. Extract the flash file in any folder on your computer or laptop device.
  2. Need to install SP Flash Tool, Driver and Instruction manual.
  3. Launch the SP Flash Tool and locates Scatter File Tool.
  4. Now, you need to connect your Alcatel MTS 982  Flash File Stock Firmware ROM  with the computer and make a connection.
  5. Now click on upgrade and just wait for some time (minutes).
  6. Once the process successfully completed you will get a green signal.
We hope this article will help you in solving the problems related to Alcatel MTS 982  Flash File Stock Firmware ROM  Flash File. And if it helps to solve your problem don’t forget to share with your friends and share your views about it.
Download Link:: Link

Friday, November 29, 2019

11:17 AM

Samsung A320FL U3 Android Root File

Samsung A320FL U3 Android Root File

SM_A320FL U3 8.0 Root
without losing the network

 How to Flash

  1. Download the relevant USB driver for your Samsung device.
  2. Download the flash tool Odin on your phone.
  3. Now, download the relevant ADB Enable File for your device.
  4. Open the Odin software then choose ADB Enable File in “AP” from the Box.
  5. Turn on USB debugging mode on your phone.
  6. Now, connect your mobile and computer with a USB cable.
  7. Open the ADB Enable tool and click on the start. After that, your device will start rebooting.
  8. Disconnect the USB cable.
  9. Select language English when your phone turns on. After that, click next.
  10. Now turn on Wi-Fi or mobile data.
  11. After that, agree on the agreements and click on next. They will ask you to verify your account.
  12. Now, connect your mobile and PC again. Then open the Atozflashfile.com..
  13. You will see some information about your mobile phone and the operating system.
  14. Click on remove FRP. The lock will be removed in a short time.
  15. Congratulations, you have successfully bypassed the FRP lock.

  • right-click to "Open as Administrator"

Follow these steps to enter Download Mode/Odin Mode
  1. Power off your device
  2. Press and hold Volume Down key, Home Key and Power Key
  3. When your device vibrates, release Power key while keep holding the Volume Down key and the Home key
  4. Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
Your device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime, you should see a light-blue box at the ID: COM section stating "COM:3" (the number depending on which USB port you have plugged the device cable and is irrelevant).

Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either BL"AP"CP"CSC
After adding the file, click "Start" to begin the flashing process
Click "Start" to flash.
DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device
Flash succeeded
Samsung A320FL U3 Android Root File
Download Link:: Link1 :: Link 2

Thursday, November 28, 2019

3:09 AM

Nokia 215 RM-1111 Flash File

Nokia 215 RM-1111 Flash File
RM-1111_ROM_eMP_12.03.11
- Insert USB cable now! ---

Wait for the phone...

Phone found! [ 16 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A4A852316BC09A7EB93C6BF1E5348AA6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done, result code 0x8000
Project ID: CRYSTAL.10.02.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_CRYSTAL_ROM_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.02.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_CRYSTAL_ROM_eMP_14.00.11
Write : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_CRYSTAL_ROM_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time: 00:00:57
Reboot phone Ok

The latest flash files of Nokia Asha 501 have been released and free downloading links are available for download. Flashing of mobile does at that stage if it working slow or completely break with the reason for its outdated or corrupted firmware. After flashing your mobile will restore in its original settings so you will need to take a backup of your data like messages, contacts, and images. Otherwise, you will lose you're all of the data and your mobile will be restored in its original settings. You can use different tools or boxes for flashing. Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. We have shared downloading links from the Nokia official server.

Now you can download latest flash files of your mobile from below downloading links. If downloading links are not working or you are unable to download flash files please contact us via commenting. Now you will get the flash file of your mobile from below buttons. The firmware will help you to hard flash your phone in few seconds so kindly take a backup of your data before flashing. You restore it after flashing.
How To Flash Nokia 225 RM-1043 Flash File
  • Download and Extract Device Firmware using WinRar or 7Zip.
  • Install Exact USB Device Drivers, If already installed then leave it
  • Power of Mobile and remove the battery if removable
  • Open Infinity Best NK2 Box / Dongle Setup.
  • Select Load Tab from Tool and select downloaded VPL file
  • Connect Mobile with Computer via USB data cable
  • Click on Write FW Tab from NK2 Best Dongle for start the process
  • Take a Moment and don,t unplug device under the flashing process
  • The flash File write process is done in a few minutes
  • An OK Message will appear on Flash Tool or device screen
  • Congratulations on Flash File Firmware installed successfully.
  • Power ON Device and you have done it.
Note: Please make a back up of your device before install or update Flashing File.
RM-1111_ROM_eMP_12.03.11
Download Link :: Link
1:24 AM

Nokia 215 RM-1110 Latest Flash File


Nokia 215 RM-1110 Latest Flash File

RM-1110_ROM_eMP_12.03.11.

- Insert USB cable now! ---

Wait for the phone...

Phone found! [ 16 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A4A852316BC09A7EB93C6BF1E5348AA6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done, result code 0x8000
Project ID: CRYSTAL.10.02.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_CRYSTAL_ROM_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.02.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_CRYSTAL_ROM_eMP_14.00.11
Write : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_CRYSTAL_ROM_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time: 00:00:57
Reboot phone Ok

The latest flash files of Nokia Asha 501 have been released and free downloading links are available for download. Flashing of mobile does at that stage if it working slow or completely break with the reason for its outdated or corrupted firmware. After flashing your mobile will restore in its original settings so you will need to take a backup of your data like messages, contacts, and images. Otherwise, you will lose you're all of the data and your mobile will be restored in its original settings. You can use different tools or boxes for flashing. Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. We have shared downloading links from the Nokia official server.

Now you can download latest flash files of your mobile from below downloading links. If downloading links are not working or you are unable to download flash files please contact us via commenting. Now you will get the flash file of your mobile from below buttons. The firmware will help you to hard flash your phone in few seconds so kindly take a backup of your data before flashing. You restore it after flashing.
How To Flash Nokia 215 RM-1110 Latest Flash File
  • Download and Extract Device Firmware using WinRar or 7Zip.
  • Install Exact USB Device Drivers, If already installed then leave it
  • Power of Mobile and remove the battery if removable
  • Open Infinity Best NK2 Box / Dongle Setup.
  • Select Load Tab from Tool and select downloaded VPL file
  • Connect Mobile with Computer via USB data cable
  • Click on Write FW Tab from NK2 Best Dongle for start the process
  • Take a Moment and don,t unplug device under the flashing process
  • The flash File write process is done in a few minutes
  • An OK Message will appear on Flash Tool or device screen
  • Congratulations on Flash File Firmware installed successfully.
  • Power ON Device and you have done it.
Note: Please make a back up of your device before install or update Flashing File.
RM-1110_ROM_eMP_12.03.11.
Download Link:: Link

Wednesday, November 27, 2019

11:09 PM

Nokia 225 RM-1043 Flash File

Nokia 225 RM-1043 Flash File
RM-1043_ROM_eMP_20.10.11
- Insert USB cable now! ---

Wait for the phone...

Phone found! [ 16 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A4A852316BC09A7EB93C6BF1E5348AA6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done, result code 0x8000
Project ID: CRYSTAL.10.02.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_CRYSTAL_ROM_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.02.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_CRYSTAL_ROM_eMP_14.00.11
Write : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_CRYSTAL_ROM_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time: 00:00:57
Reboot phone Ok

The latest flash files of Nokia Asha 501 have been released and free downloading links are available for download. Flashing of mobile does at that stage if it working slow or completely break with the reason for its outdated or corrupted firmware. After flashing your mobile will restore in its original settings so you will need to take a backup of your data like messages, contacts, and images. Otherwise, you will lose you're all of the data and your mobile will be restored in its original settings. You can use different tools or boxes for flashing. Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. We have shared downloading links from the Nokia official server.

Now you can download latest flash files of your mobile from below downloading links. If downloading links are not working or you are unable to download flash files please contact us via commenting. Now you will get the flash file of your mobile from below buttons. The firmware will help you to hard flash your phone in few seconds so kindly take a backup of your data before flashing. You restore it after flashing.
How To Flash Nokia 225 RM-1043 Flash File
  • Download and Extract Device Firmware using WinRar or 7Zip.
  • Install Exact USB Device Drivers, If already installed then leave it
  • Power of Mobile and remove the battery if removable
  • Open Infinity Best NK2 Box / Dongle Setup.
  • Select Load Tab from Tool and select downloaded VPL file
  • Connect Mobile with Computer via USB data cable
  • Click on Write FW Tab from NK2 Best Dongle for start the process
  • Take a Moment and don,t unplug device under the flashing process
  • The flash File write process is done in a few minutes
  • An OK Message will appear on Flash Tool or device screen
  • Congratulations on Flash File Firmware installed successfully.
  • Power ON Device and you have done it.
Note: Please make a back up of your device before install or update Flashing File.
RM-1043_ROM_eMP_20.10.11.rar
Download Link:: Link
10:04 PM

Nokia 130 ss Rm 1037 Flash File

Nokia 130 ss Rm 1037 Urdu Arabic Flash File

RM-1037_ROM_eMP_10.02.11.rar
--- Insert USB cable now! ---

Wait for the phone...

Phone found! [ 16 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A4A852316BC09A7EB93C6BF1E5348AA6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done, result code 0x8000
Project ID: CRYSTAL.10.02.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_CRYSTAL_ROM_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.02.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_CRYSTAL_ROM_eMP_14.00.11
Write : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_CRYSTAL_ROM_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time: 00:00:57
Reboot phone Ok

The latest flash files of Nokia Asha 501 have been released and free downloading links are available for download. Flashing of mobile does at that stage if it working slow or completely break with the reason for its outdated or corrupted firmware. After flashing your mobile will restore in its original settings so you will need to take a backup of your data like messages, contacts, and images. Otherwise, you will lose you're all of the data and your mobile will be restored in its original settings. You can use different tools or boxes for flashing. Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. We have shared downloading links from the Nokia official server.

Now you can download latest flash files of your mobile from below downloading links. If downloading links are not working or you are unable to download flash files please contact us via commenting. Now you will get the flash file of your mobile from below buttons. The firmware will help you to hard flash your phone in few seconds so kindly take a backup of your data before flashing. You restore it after flashing.
How To Flash Nokia 130 ss Rm 1037 Urdu Arabic Flash File
  • Download and Extract Device Firmware using WinRar or 7Zip.
  • Install Exact USB Device Drivers, If already installed then leave it
  • Power of Mobile and remove the battery if removable
  • Open Infinity Best NK2 Box / Dongle Setup.
  • Select Load Tab from Tool and select downloaded VPL file
  • Connect Mobile with Computer via USB data cable
  • Click on Write FW Tab from NK2 Best Dongle for start the process
  • Take a Moment and don,t unplug device under the flashing process
  • The flash File write process is done in a few minutes
  • An OK Message will appear on Flash Tool or device screen
  • Congratulations on Flash File Firmware installed successfully.
  • Power ON Device and you have done it.
Note: Please make a back up of your device before install or update Flashing File.
RM-1037_ROM_eMP_10.02.11.rar

Download Link:: Link