Breaking

Thursday, November 28, 2019

Nokia 215 RM-1110 Latest Flash File


Nokia 215 RM-1110 Latest Flash File

RM-1110_ROM_eMP_12.03.11.

- Insert USB cable now! ---

Wait for the phone...

Phone found! [ 16 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : A4A852316BC09A7EB93C6BF1E5348AA6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done, result code 0x8000
Project ID: CRYSTAL.10.02.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_CRYSTAL_ROM_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
SecureDecrypt : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.02.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_CRYSTAL_ROM_eMP_14.00.11
Write : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
Write : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_CRYSTAL_ROM_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_LANG_PACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_CUSTPACK_ROM_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_JUMP_TABLE_IJ_eMP_14.00.11
[VERIFY] DONE : RM-1035_CRYSTAL_VIVA_eMP_14.00.11
CODE_VERIFY : Ok

Flashing done!
Total flash time: 00:00:57
Reboot phone Ok

The latest flash files of Nokia Asha 501 have been released and free downloading links are available for download. Flashing of mobile does at that stage if it working slow or completely break with the reason for its outdated or corrupted firmware. After flashing your mobile will restore in its original settings so you will need to take a backup of your data like messages, contacts, and images. Otherwise, you will lose you're all of the data and your mobile will be restored in its original settings. You can use different tools or boxes for flashing. Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. We have shared downloading links from the Nokia official server.

Now you can download latest flash files of your mobile from below downloading links. If downloading links are not working or you are unable to download flash files please contact us via commenting. Now you will get the flash file of your mobile from below buttons. The firmware will help you to hard flash your phone in few seconds so kindly take a backup of your data before flashing. You restore it after flashing.
How To Flash Nokia 215 RM-1110 Latest Flash File
  • Download and Extract Device Firmware using WinRar or 7Zip.
  • Install Exact USB Device Drivers, If already installed then leave it
  • Power of Mobile and remove the battery if removable
  • Open Infinity Best NK2 Box / Dongle Setup.
  • Select Load Tab from Tool and select downloaded VPL file
  • Connect Mobile with Computer via USB data cable
  • Click on Write FW Tab from NK2 Best Dongle for start the process
  • Take a Moment and don,t unplug device under the flashing process
  • The flash File write process is done in a few minutes
  • An OK Message will appear on Flash Tool or device screen
  • Congratulations on Flash File Firmware installed successfully.
  • Power ON Device and you have done it.
Note: Please make a back up of your device before install or update Flashing File.
RM-1110_ROM_eMP_12.03.11.
Download Link:: Link

No comments:

Post a Comment